Products
Yokogawa CA71 Multifunction Calibrator
May 17, 2021
Digital Hydraulic Pressure Gauge Test Kit for CAT Komatsu
May 17, 2021
Druck DBC 150/650 Dry Block Temperature Calibrator
- Ranges:
- DBC 150: -45°C (below ambient) to 150°C.
- DBC 650: 50°C (25°C above ambient) to 650°C.
- Fast response: Rapid heating, cooling and settling.
- Stability: Druck control technology provides excellent temperature stability.
DBC Series – Key Features
- Ranges:
- DBC 150: -45°C (below ambient) to 150°C.
- DBC 650: 50°C (25°C above ambient) to 650°C.
- Fast response: Rapid heating, cooling and settling.
- Stability: Druck control technology provides excellent temperature stability.
- Reference probe: PT 100 reference probe input.
- RS 232 interface: Allows fully automated PC control.
- Switch test: Open/closed detection with hysteresis displayed.
- Ramp, preset, step: Programmable Ramp, Preset recall and calibration Step sequences.
- Reduction Inserts: A wide range of standard interchangeable inserts are available.
- Easy to use: Full numeric keypad and input/output menu.
TC Version – Additional Features
The calibrator version includes the following features in addition to those listed above:
- Electrical Inputs: Measures RTDs, T/Cs, mV/V, mA and ohms.
- Dual Readout: Simultaneous reading of source temperature and device output.
- Error Analysis: Percentage error and deviation calculations.
- Loop Power: 24 VDC supply
The DBC series is rugged, easy to use and designed to give years of reliable service. Stand alone operation eliminates the need for secondary equipment, making the DBC one of the most cost effective temperature calibration systems available.
Applications
Multifunction Dryblock Calibrators
The DBC Series is comprised of two models, the DBC TS Temperature Source and the stand alone DBC TC Temperature Calibrator. They are designed for calibrating and maintaining temperature elements, probes, transmitters and thermostats. The two models share the same temperature control technology and differ only in electrical measurement capabilities.
DBC TS Temperature Source
The DBC TS temperature source uses an internal high accuracy sensor to ensure maximum control stability. For direct measurement of the insert temperature, a PT 100 electrical input is provided and traceable reference probes are available. A switch detection input is supported with a fully automatic switch test facility.
Specification
DBC 150 TS and DBC 150 TC
| Range | -45 (below ambient) to 150ºC (over 18ºC to 50ºC ambient only) |
| Stability | 0.03ºC |
| Resolution | 0.01ºC |
| Radial Uniformity | 0.15ºC (assumes measuring elements are at the same height and standard insert is used) |
| Heating Time* | 14 minutes from 20°C to 120ºC |
| Cooling Time* | 22 min |
DBC 650 TS and DBC 650 TC
| Range | 50° to 650ºC (Ambient +25° to 650ºC) |
| Stability | 0.05ºC (0.15°C between 50°C to 70°C) |
| Resolution | 0.01ºC |
| Radial Uniformity | 0.25ºC (assumes measuring elements are at the same height and standard insert is used) |
| Heating Time* | 22 minutes from 25°C to 650ºC |
| Cooling Time* | 27 minutes from 60°C to 100ºC (with optional cooling probe) |
Standard Features
Display
2.4 x 1.6 in (60 x 40 mm) graphic LCD with backlight
Keypad
21 keys including full numeric keypad and special function keys for Step, Ramp, Preset Recall and Switch Test. Key tone on/off.
User interface
Easy to use input/output menu.
Language
Selectable languages English, French, German, Italian, Portuguese and Spanish.
Units
°C, °F and °K
Reference probe input
Pt 100 input. 4 wire mating connector supplied. User programmable probe CVD coefficients. Refer to RTD Pt 100 Specifications.
Switch test
Continuity check with buzzer. Captures open/closed temperatures and records hysteresis.
Reviews
There are no reviews yet.